• info@therollzone.com
  • 7984276056

OUR HIGH TECH RUBBER COVERINGS

ASH-FOURD

Hardness 94 - 98° A
Thickness 10 – 20mm
Temperature Resistance Up to 110° C
The basic characteristic of this cover is to prevent the wire slippage and enhance the life of wire. The cover is resistant to attacks of mild wire chemicals. This cover is used in Fourdnier Couch Roll, Forward Drive Roll and Breast roll.

ASH-TOUCH

Hardness 85 - 96° A
Thickness 15 – 25mm
Temperature Resistance Up to 105° C
This new engineered rubber cover is suitable for heavy nip loads at elevated temperature on MG. It has got excellent wear and heat resistance. The rubber is tough enough at heavy loads.

ASH-ROCK

Hardness 0 – 1 P&J
Thickness 11 – 20mm
Temperature Resistance Up to 90° C
This is a superb hard cover for Top Press, Size Press position and has good wear and tear resistance property. The cover can withstand doctoring also.

ASH-TOUCH HR

Hardness 90 - 92° S A
Thickness 15 – 25mm
Temperature Resistance Up to 140° C
This is a specialty rubber coated roll for MG Touch Roll. It features excellent heat resistance property, good elasticity and good chemical and wear resistance.

ASH-STONE C

Hardness 0 – 1 P&J
Thickness 11 – 20mm
Temperature Resistance Up to 120° C
This is a rock hard cover with outstanding abrasion resistance. This cover fulfills the sheet release property and enjoys good repellence. This can be easily doctored and enjoys resistance to press part chemicals. This cover is usually used in Centre Press rolls and Top Press Rolls.

ASH-SOFTEX

Hardness 30-45° SA
Thickness 15-35 mm
Temperature Resistance Up to 80°C
Very soft, non adhesive rubber cover for Couch Rolls and Lump Breaker Rolls. It has got excellent wear and chemical resistance property. It breaks the lumps to form uniform pulp.

ASH-PRESS

Hardness 83 - 93° A
Thickness 15 – 25mm
Temperature Resistance Up to 100° C
A suitable Press Roll cover, having high wear resistance property and resistance to attacks of mild chemicals

ASH-TAN

Hardness 90 -95° S A
Thickness 7 - 15mm
Temperature Resistance Up to 80°C
This roll cover has very high wear and tear resistance and antistatic properties for better sheet release on the rewinder and increases the life of popreel drum. This cover is suitable for Tambour Rolls.

ASH-TECH PRESS

Hardness 82 - 95° A
Thickness 15 – 25mm
Temperature Resistance Up to 110° C
Highly versatile rubber cover for heavily nip loaded Press Rolls and Blind Drilled Press Rolls. This cover has got excellent heat characteristics and high wear and tear resistance.

ASH-TECH HEAVY PRESS

Hardness 88 -92° S A
Thickness 15 – 25mm
Temperature Resistance Up to 120°C
This cover is especially engineered for heavily nip loaded (25-400kg/cm) Press Rolls. This cover enjoys anti hysterics property. It has got highly abrasion resistance and wear and tear resistant property.

ASH SOFTEX LB

Hardness 35 - 45° SA
Thickness 15 – 25mm
Temperature Resistance Up to 80° C
It is a soft elastomeric compound that Lump breaking rolls need to continuously release fiber from their surface. It's low but uniform pressure smoothens and dewaters the paper as it leaves the fabric, providing the desired finish. It is resistant to most paper making chemicals. Most suitable for Lump Breaker Rolls application.

ASH-KOTE

Hardness 65 -75° SA
Thickness 20 – 25mm
Temperature Resistance Up to 120°C
This cover has superior marking and crack resistance to withstand wad impact and sheet raps, while maintaining superior resistance to provide long runs. It also exhibits excellent chemical resistance to paper making machine. Most suitable for Backing rolls application.

ASH-CONVEY

Hardness 70-85° SA
Thickness 15-20mm
Temperature Resistance Up to 120°C
This cover features excellent abrasion resistance as well as wear and tear resistance, ideal for conveyor belts. Drifting of conveyor belt is overcome by grooving on the roller surface, thereby increasing the life of the conveyor belts.

Ebonite

Hardness 100° SA
Thickness 5-10mm
Temperature Resistance Up to 80°C
This is a heavily cross-linked hard cover for Felt Rolls and Table Rolls. It features good wear and tear resistance and antistatic property.

ASH-BLACK

Hardness 100° A
Thickness 7 – 15mm
Temperature Resistance Up to 80° C
Highly polished covering to resist the attacks of fabric conditioning chemicals and solvents. It enjoys extreme wear and tear resistance and can be doctored. This cover enjoys high water repellence, Suitable for Felt Roll and Dryer Felt Roll.

ASH-MATE

Hardness 10 - 45 P&J.
Thickness 13 – 26mm.
Temperature Resistance Up to 120° C
This soft rubber cover has vibrant properties satisfying the sizing applications of a paper machine. This cover enjoys good chemical resistance and is resistant to elevated sizing material temperature.